Description
An abrasive degreaser gel that combines the actions of Microgrit No. 2 and Screen Degreaser Liquid No. 3.
The abrading action of Ulanogel 23 promotes better wetting of the mesh and adhesion of the stencil, and thus, longer press life. Its degreasing action removes dirt, dust, and oils from the mesh, reducing the risk of stencil failure and pinholing.
Ulanogel 23 is ready-to-use and rinses off in hot or cold water. Its thixotropic character permits easy and effective preparation of larger screens held in a vertical position. Non-caustic – will not harm frames, mesh, or adhesives on stretch and glue frames. Recommended for use with all stencil systems on synthetic mesh only.
Instructions
- Dampen the screen mesh with water.
- Apply Ulanogel 23 to both sides of the screen and scrub vigorously with a wet, stiff, short-bristle nylon brush on both sides of the mesh.
- Rinse the screen throroughly from both sides, including the inside edge of the frame and the frame corners, with hot or cold water.
Health & Safety Information
Ulanogel 23 may be irritating if it comes into contact with the skin or eyes.First Aid: In case of contact with the eyes or skin, flush immediately with water for 15 minutes and contact a physician.
