Cad-Color SuperTEK Clear

Opaque Printable Heat Transfer Material

$16.03 Ex. GST

Buy between 5-25 meters and get 5% discount. Buy 25+ meters and get 16% discount.
Select delivery location

A thin and lightweight polyurethane material.

Print and cut media for full colour designs on white and light coloured fabrics. Perfectly suited for promotional items and fashion.

Description

Recommanded Fabrics

  • 100% cotton
  • 100% polyester*
  • Polyester-cotton-blends
  • Lycra®/ spandex blends
  • Most nylon garments*
    Test before application

Application Instructions

  • Temperature: 150° C
  • Time: 5 sec.
  • Pressure: medium
  •  (#4-6 on Hotronix®)
  • Peel: warm/cold
  • Repress: 5 sec.

Cutting Notes

  • You should always test cut prior to any production run.
  • Remember cutter settings will need to be adjusted as your blade ages.
  • Cutting too deep will result in weeding or printing difficulties.

Additional information

Weight N/A
Dimensions N/A
Size
  • per meter
Roll width
  • 50cm

Additional Information

1-Color Application Instructions

Time:Tack for 5 seconds, peel warm and cover and seal 5 seconds. Temperature: 280-300°F/ 138-150°C Pressure:Medium (#6 on Hotronix) Peel: Warm

Care Instructions:

Machine wash inside-out using mild detergent. Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.

Material/Fabric Compatibility

  • 100% Cotton
  • 100% Polyester
  • 100% Preshrunk Cotton
  • Cordura®
  • Cotton/Poly Blends
  • Leather
  • Lycra®/Spandex Blends
  • Neoprene
  • Nylon

Storage:

Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.

Cutter Guidelines

Cutter Blade Force Offset Speed
Roland GX-24 45° 80-90g 0.25 30 cm/s
Roland VP-300 45° 80-90g .25 30cm/s
Roland SP-300 45° 80-90g 0.25 30 cm/s
Roland XC-540 45° 80-90g .25 30cm/s
Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.